Primeiros Passos com a ACPI

# Renaming GPUs (SSDT-GPU-SPOOF)

So this is mainly needed for GPUs that are not natively supported out of the box due to their names, most commonly:

  • R9 290/390
  • R9 280/380
  • R7 270/370
  • R9 260/360
  • R7 250
  • R7 240

Instead, these GPUs need to be "spoofed" or faked into a model that closely matches theirs, generally this will be the "X" variant of the card. For some reason Apple never bothered adding the PCI IDs for these other cards even though their GPU cores are supported by the driver.

So to spoof the GPU, we need to find a couple things:

# Finding a suitable PCI ID

# Web

To find a suitable PCI ID, we'll be using PCI ID Repository (opens new window) which has a full database of all AMD GPUs. For this example, we'll be creating a Spoof SSDT for the R9 390. For a full list of supported GPUs, please see the GPU Buyers Guide (opens new window). The closest match to this GPU would be the 390X, and looking on that site near the top gives us this:

Vendor 1002 -> Device 1002:67b0

Now lets break this down into a device ID we can use:

  • 1002: The vendor ID, all AMD devices have this ID
  • 67B0: The device ID, this is what we care about

So how do we convert this to a fake ID? Well the format of a fake ID:

"device-id",
Buffer (0x04)
{
     0xB0, 0x67, 0x00, 0x00
},

As you can see, the bytes are swapped in pairs. Keep this in mind when we make our SSDT

The specifics are due to Endianness (opens new window) for those who are curious

# Linux

If you can run Linux, use command lspci -vmmnnD -d 1002::0300

$ lspci -vmmnnD -d 1002::0300
Slot: 0000:01:00.0
Class: VGA compatible controller [0300]
Vendor: Advanced Micro Devices, Inc. [AMD/ATI] [1002]
Device: Oland [Radeon HD 8570 / R7 240/340 / Radeon 520 OEM] [6611]
SVendor: Micro-Star International Co., Ltd. [MSI] [1462]
SDevice: Device [3740]
Rev: 87

You can easily get

  • Slot ID 0000:01:00.0, we need it later
  • Vendor ID 1002, all AMD devices have this ID
  • Device ID 6611, this is what we care about
  • Device name Radeon HD 8570 / R7 240/340 / Radeon 520 OEM, mainly cosmetic

# Finding the ACPI Path of the GPU

# Windows

To find the PCI path of a GPU is fairly simple, best way to find it is running Windows:

  • Open Device Manager
  • Select Display Adapters, then right click your GPU and select Properties
  • Under the Details Tab, search for "Location Paths"
    • Note some GPUs may be hiding under "BIOS device name"

Credit to 1Revenger1 for the image

The second "ACPI" is what we care about:

ACPI(_SB_)#ACPI(PC02)#ACPI(BR2A)#ACPI(PEGP)#PCI(0000)#PCI(0000)

Now converting this to an ACPI path is quite simple, remove the #ACPI and #PCI(0000):

\_SB_.PC02.BR2A.PEGP

# Linux

Substitute your SLOTID found above into command cat /sys/bus/pci/devices/SLOTID/firmware_node/path, you cat get

$ cat /sys/bus/pci/devices/0000:01:00.0/firmware_node/path
\_SB_.PC02.BR2A.PEGP

And voila! We've found our ACPI path, now that we have everything we're ready to get cooking

# Making the SSDT

To start grab our SSDT-GPU-SPOOF (opens new window) and open it up. Here there's a couple things to change:

External (_SB_.PCI0, DeviceObj)
External (_SB_.PCI0.PEG0.PEGP, DeviceObj)

For our example, we'll change all mentions of :

  • PCI0 with PC02
  • PEG0 with BR2A

Hint: If your ACPI path is a bit shorter than the example, this is fine. Just make sure the ACPI paths are correct to your device.

Now that the ACPI pathing is correct, we can finally apply our fake ID!!!

So the 2 parts we want to change:

device ID:

"device-id",
Buffer (0x04)
{
    0xB0, 0x67, 0x00, 0x00
},

Model:

"model",
Buffer ()
{
    "AMD Radeon R9 390"
}

"device-id" will be set to our PCI ID that we found in "Finding a suitable PCI ID" and "model" is mainly cosmetic

# Now you're ready to compile the SSDT!

⟵ Limpeza ⟶